Planet Technology IDL-2402 Modify, 4.3.7.2 Interface Setup

4.3.7.2 Interface Setup

This option allows you to setup the interface for IPoA/IPoE IWF. From the Bridge menu, click on IPOA and then Interface Setup. The following page is displayed.

Click on the radio button to select a circuit, set values for the parameters, and then click on Modify button.

	IPoA Interface Setup
Label	Description
	Click on the drop-down list and select the line ports to be listed.
VPI	Type in the VPI. Value range is 0 ~ 255.
VCI	Type in the VCI. Value range is 21, 32 ~ 65535.
MaxMAC	Type in the maximum number of MAC addresses that can be learned by
	the bridge port (for GBE interface: 1 ~ 4096, for DSL interface: 1 ~ 128).
CVID	Type in the VID value of C-Tag (the innermost VLAN tag as defined in
	IEEE 802.1ad and having an EtherType value of 0x8100). The C-VID
	indicates the access loop.
CVPRI	Click on the drop-down list and select the VLAN priority level of C-Tag
	(Pri-0 ~ 7).

- 139 -