transition of L0 to L2 state or an L2 low power trim request. Value range is 0 ~ the

 

 

value of L2 ATPRT (dB).

 

 

 

 

 

Type in the total maximum aggregate transmit power reduction (in dB) that is

 

L2 ATPRT

allowed in the L2 state; the total reduction is the sum of all reductions of L2 Request

 

 

(i.e., at transition of L0 to L2 state) and L2 power trims. Value range is 0 ~ 15 (dB).

 

 

 

 

Direction

DS: downstream. US: upstream.

 

 

 

 

Message

Type in the minimum rate of the message-based overhead that shall be maintained

 

by the ATU in upstream/downstream direction. Value range is 4 ~ 28k bit/s.

 

 

 

 

 

 

 

Type in the Noise Margin values.

 

Noise Margin

Min: Minimum noise margin (0.0~31.0,51.1db, default 0.0)

 

Tar: Target noise margin (0.0~31.0,51.1db, default 6.0)

 

 

 

 

Max: Maximum noise margin (0.0~31.0,51.1db, default 51.1)

 

 

 

 

Modify

Click on this button to submit the modification

 

 

 

 

Delete

Click on this button to delete a profile

 

 

 

 

Query

Click on this button to display the profiles.

 

 

 

 

 

Click on this button to view/modify allowed ADSL modes of operation for the profile.

 

 

The following page is displayed.

 

 

An OP Mode is supported if the check box is selected.

 

 

Modify Status:

 

 

Complete – modems will re-train after you click on Apply button

OP Mode-N

(To be continued)

- 146 -