4.7.4 ATM Loopbacks

This option allows you to modify the ATM F4/F5 entries or send the diagnostic entry. From the Maintenance menu, click on ATM Loopbacks. The following page is displayed:

 

ATM Loopbacks Setup

Label

Description

 

 

OAM Cell Generation

Click on the radio button to Disable/Enable OAM Cell Generation. Then

click on Apply button to submit the setting.

 

 

 

 

Click on the drop-down lists to select port range and PVC (1 ~ 8).

 

 

 

Click on this button to create a loopback setting.

Create

Note: make sure the interface has been setup and the service state of the

 

 

circuit is turned on.

 

 

Query

Click on this button to query the loopback status.

 

 

Delete

Click on this button to delete a loopback entry.

 

 

Select

Click on the checkbox to select the PVC you want to create or delete the

loopback setting for.

 

 

 

Port

This field shows the line port and PVC number.

 

 

LoopBack ID

Type in a loopback ID (32 digit).

 

 

Test Type

Select the loopback type: F5 E2E or F5 Segment.

 

 

Status

This field shows current loopback testing status. Possible values are:

Fail, Success, In Progress, or ----.

 

 

 

- 183 -