PerformPolar Fitness Test
1. Wear the WearLink, lie down and relax for 1-3
minutes.
2. In Time mode, select Menu > Applications >
Fitnesstest > Start test. The fitness test
beginsinstantly once the FT60 has located
yourheart rate.
3. About 5 minutes later, a beep will indicate the
endof the test, and your test result will appear
onthe display.
4. Press OK.UPDATE VO2max?is displayed.
5. Select Yes to save the test result in your User
informationand OwnIndex results. If you
knowyour laboratory measured VO2max value
andhave entered it in User information,
selectNo to save your test result in OwnIndex
resultsonly.
Troubleshooting
Setactivity lev. of past 3 months is
displayed> Set your activity level (see Settings
formore information on activity levels).
Activityset! is displayed and the test begins.
TestFailed is displayed > Your most recent
OwnIndexvalue is not replaced.
No heart rate shown > Test fails. Check that
thetransmitter electrodes are moist enough
andthat the strap is snug enough around your
chest.
ENGLISH
BeforeTraining 13