SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

encapsulated for prioritization as they are routed to and from a SIP proxy server. See the SpectraLink 8000 SVP Server Administration Guide for SIP document for detailed information about this device.

SpectraLink 8020/8030 Wireless Telephone Security

SpectraLink 8020/8030 Wireless Telephones support the 802.11i standard including Wi-Fi Protected Access (WPA and WPA2) in the pre-shared key (PSK) mode. As vendors introduce access points (APs) that are eligible to become Wi-Fi CERTIFIED for WPA-PSK and/or WPA2-PSK, Polycom will determine compatibility with the SpectraLink 8020/8030 Wireless Telephones and include these APs on the Polycom WLAN Compatibility Table.

SpectraLink 8020/8030 Wireless Telephones support basic WMM as part of the 802.11e standard. If the AP supports WMM, the handset automatically discovers and uses it. WMM does not replace the SpectraLink 8000 SVP Server as described in the first paragraph. WMM settings must be configured on the SpectraLink 8000 SVP Server.

The SpectraLink 8020/8030 Wireless Telephone supports Wired Equivalent Privacy (WEP) as defined by the 802.11 standard. Polycom offers the product with both 40-bit and 128-bit encryption.

The latest software versions are required to support the features described in this document.

Quick Start Guide

1.A wireless LAN must be properly configured and operational through the use of 802.11 wireless APs.

2.A TFTP server must be available on the network in order to load the appropriate software onto the handsets. See Chapter 3 Software License and Protocol Management for detailed instructions for loading software on handsets.

3.The supported SIP system components must be connected to your network and completely operational.

10

PN: 1725-36038-001_B.doc

Page 10
Image 10
Polycom 1725-36038-001 manual SpectraLink 8020/8030 Wireless Telephone Security, Quick Start Guide