SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
2.Then, walk the site again, in MyID/Smry ESSID mode, this time checking that every location has adequate coverage (there should be at least one AP stronger than
3.Finally, use the single AP (MyID/Detl) display to check each AP, to ensure it is configured for the proper data rates, beacon interval, 802.11 options enabled, QoS method, and security method.
Make any necessary adjustments to AP locations and configurations and repeat steps 1 through 3 until the site survey shows adequate coverage and correct configuration at every location.
The installation is not complete until these certification steps have been performed. Do not hand out handsets at a site that has not been certified.
84 | PN: |
