SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Username
Enter a username that matches an entry on the Radius server. Usernames are alphanumeric strings, and can be entered using the alphanumeric string entry technique.
Password
Enter the password that corresponds to this Username.
Consult the Configuration Guide for the APs installed in your facility for information on which of the WPA versions are recommended by Polycom engineering. Configure the recommended version on the AP and select the corresponding option on the Admin menu.
Regulatory Domain/802.11 Config/Transmit Power
Regulatory domain, 802.11 configuration and transmit power are interdependent. See Appendix A: Regulatory Domains for regulatory domain setting specifications. Polycom recommends that you check with local authorities for the latest status of national regulations for both 2.4 and 5 GHz wireless LANs.
FCC requirements dictate that the menu for changing the regulatory domain be available by password, which in our case is the LINE key. Press LINE and then navigate to the desired domain. Press NavOK to set the domain.
01- North America
02– Europe
03– Japan
04– Singapore
05– Korea
06– Taiwan
07– Hong Kong
802.11 config
Once the regulatory domain is set, the 802.11 Config modes are displayed. Only one may be chosen. 802.11(b & b/g mixed) is the default. Press NavOK to set the mode. If the mode has subbands, the Subband list will open. If the mode does not have subbands, the Transmit Power list will open.
34 | PN: |
