SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Configuration Process
1.Download the latest SpectraLink 8020/8030 Wireless Telephone IP software from http://www.spectralink.com/softwareUpdates.
2.Load the latest version of the SIP code and place it on the TFTP
server and ensure the TFTP server is started. The four files that are needed must be named:
usb downloader | pd14udsp.bin |
functional filename | pd14csp.bin |
phintl filename | pi1400sp.bin |
ota downloader | pd14odsp.bin |
config file | slnk_cfg.cfg |
3.Use the Handset Administration Tool to set up the configuration of each handset to meet all essential requirements. If not using the Handset Administration Tool, ensure the following parameters are correctly set in the Admin menu for each handset: See Chapter 2 SpectraLink 8020/8030 Wireless Telephone Configuration for detailed configuration instructions.
—If statically assigning IP addresses, ensure that the Phone IP, Subnet Mask, and Default Gateway information are accurate. If using a DHCP Server, ensure that the DHCP option is set.
—Ensure the handset has properly configured SSID and Reg Domain information.
—Ensure the Telephony Protocol menu option is set to 36. This ensures the handset will check for the proper SRP files each time it powers on.
—Ensure security settings are properly programmed.
4.Power cycle the handset.
5.The SIP code will now download to the handset. The status bar will increment fully across the display for each function that is being performed in the download process. Upon completion of the update process, the handset will
During the second download evolution, the handset receives code from the TFTP server for system configuration and for its own settings. Once this second evolution is complete, the handset is ready to use.
44 | PN: |
