SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
SVP Server IP The IP address of the SpectraLink 8000 SVP Server. If using Static IP configuration, this is simply the IP address of the SpectraLink 8000 SVP Server. Note that the SpectraLink 8000 SVP Server must be statically configured to have a permanent IP address. If DHCP is being used, the handset will try the following, in order: the DHCP option 151, then a DNS lookup of “SLNKSVP2” if the DHCP options 6 (DNS server) and 15 (Domain Name) are configured.
SIP TFTP Server IP The IP address of a TFTP server on your network, which holds SIP configuration files. In static mode, this parameter must be configured with an IP address. In DHCP mode, the SIP TFTP server may be specified by defining the address on the DNS server for the name “siptftp” If this is not defined, the address specified in option 66 will be used. See Chapter 4, SIP Integration Factors.
OAI Server IP The IP address of the SpectraLink 8000 OAI Gateway. If using Static IP configuration, this is simply the IP address of the SpectraLink 8000 OAI Gateway. If DHCP is being used, the handset will try the DHCP option 152.
SSID
Enter the SSID.
Security
*NONE disables any 802.11 encryption or security authentication mechanisms.
For WEP,
Encryption codes display as they are entered. For security reasons codes will not display when a user returns to the Admin menu, Encryption options.
WEP (Wired Equivalent Privacy) is a wireless encryption protocol that encrypts data frames on the wireless medium allowing for greater security in the wireless network. If WEP is required at this site, you must configure each handset to correspond with the encryption protocol set up in the APs. Select the entries from the options below to enable the handset to acquire the system.
32 | PN: |
