Using the SIP Handset
If you want to… | Then… |
|
|
|
|
Change the | Press the up/down volume buttons on the side of the handset during ringing, or | |
ring volume | while the handset is in standby mode. |
|
|
| |
Adjust the | While speakerphone is active, press the up/down volume buttons on the side of | |
speaker volume | the handset during the call. |
|
|
| |
Adjust the | While the headset is plugged in, press the up/down volume buttons on the side | |
headset volume | of the handset during the call. |
|
|
|
|
Mute/Unmute a call | Press the Mute softkey. |
|
| When the handset is muted, the audio flowing icon | changes to the audio |
| ||
|
| |
End a call | Press the End softkey to maintain the active mode and view the active calls. | |
| Press the END key on the keypad to return to the standby mode. | |
|
| |
Change the profile | Press the Prof softkey and use the Nav keys to select a new profile while in | |
| standby mode. The selected profile is marked with an asterisk (*). | |
|
|
|
Open Config menu | Press the Cfg softkey from standby mode. |
|
|
| |
Turn on the backlight | The backlight comes on when any key is pressed or when there is an incoming | |
| call, and stays on for 10 seconds. It turns off if another key is not pressed within | |
| that period. |
|
|
| |
Resume a call on hold | Press the Resm softkey. If more than one call is on hold, use the Nav ef keys | |
from standby. | to select the call you wish to resume and press the Resm softkey or NavOK. | |
|
|
|
PN: | 69 |
