SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Message

Description

Action

Bad Config

Some needed configuration parameter

Check all required handset

 

has not been set.

configuration parameters for valid

 

 

settings.

Bad ESSID

The handset is configured for “static

Enter an ESSID in the configuration

 

ESSID” (as opposed to “Learn once” or

settings or change to one of the “Learn”

 

“Learn always”), and no ESS ID has

modes.

 

been entered.

 

Bad Phintl File

Handset software download files are

Download new software from the

 

incorrect or corrupted.

Polycom website per Software

 

 

Maintenance.

Bad Program File

Handset software download files are

Download new software from the

 

incorrect or corrupted.

Polycom website per Software

 

 

Maintenance.

Bad SIP TFTP IP

A bad unicast address has been

Re-enter the correct IP address in the

 

entered for the SIP TFTP server in

administrative menus for static IP

 

static entry mode.

addresses.

(battery icon),

Low battery.

In call: the battery icon displays and a

Battery Low,

 

soft beep will be heard when the user is

beep (audio)

 

on the handset and the battery charge

 

 

is low. User has 15–30 minutes of

 

 

battery life left.

 

 

Not in call: The battery icon displays

 

 

whenever the battery charge is low The

 

 

message Battery Low and a beep

 

 

indicate a critically low battery charge

 

 

when user is not on the handset. The

 

 

handset will not work until the Battery

 

 

Pack is charged.

Battery Failure

The Battery Pack is not functioning.

Replace the Battery Pack with a new or

 

 

confirmed SpectraLink Battery Pack.

 

 

Only SpectraLink Battery Packs will

 

 

work.

Battery Failed

Battery Pack is damaged or

Replace the Battery Pack with a new or

 

incompatible with handset.

confirmed SpectraLink Battery Pack.

 

 

Only SpectraLink Battery Packs will

 

 

work.

Can’t Renew

y…y = DHCP server IP address.

Configuration problem. Check the IP

DHCP

DHCP server is not responding to

address configuration in the DHCP

yyy.yyy.yyy.yyy

initial renewal attempt.

server.

Charging …

The handset is charging in the desktop

No action needed.

 

charger.

 

Charge Complete

The handset is now fully charged.

No action needed.

 

 

 

Checking Code

Handset is contacting the TFTP server

None, this message should only last for

 

to determine if it has a newer version

approximately one second. If message

 

of software that should be

remains displayed, power off and

 

downloaded.

contact customer support for a

 

 

replacement phone.

90

PN: 1725-36038-001_B.doc

Page 90
Image 90
Polycom 8020, 8030, 1725-36038-001 manual Dhcp