SpectraLink Wireless Telephone Configuration
OAI Enable/Disable
Polycom’s Open Application Interface (OAI) enables
If you have an OAI Gateway installed in your system, OAI may be optionally enabled in each handset. You may select whether the handset should attempt to connect to the SpectraLink 8000 OAI Gateway by choosing either the Enable or Disable options in this menu.
If OAI is enabled, and an IP address (called the OAI Server IP) is available to the handset (either via DHCP or Static IP configuration), the handset will communicate with the OAI Gateway at
Location Service
Location service may be used to enable or disable the Ekahau Real- Time Location System (RTLS), select a transmit interval, or enter a static IP address for the Ekahau Positioning Engine (EPE). Location services capability is provided by the EPE 4.0 using Ekahau Location Protocol (ELP). See Ekahau’s user documentation for more information.
RTLS [Enable/Disable] The RTLS is disabled by default. Press NavOK to toggle to the alternate setting. When RTLS is enabled, the handset will display the RTLS icon 
in the top center of the screen.
The ring indicator icon will take precedence over the RTLS icon, i.e. the new icon will not be visible while the handset is ringing. When ringing has ceased and the ring indicator becomes inactive, the RTLS icon will again appear (regardless of hook state).
Transmit interval Allows selection of 1 minute, 5 minutes, or 10 minutes for maximum time between transmit intervals. Default transmit interval is 10 minutes. Press NavOK to select the desired transmit interval.
PN: | 29 |
