Polycom 8030, 8020, 1725-36038-001 manual Mailnotify

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Parameter	Value	Description	Notes
PROXYn_PRACK	enable	Enables reliable	n = 1, 2, 3
	disable	provisional responses
		to INVITE requests
PROXYn _	name@xxx.xxx.xxx.x	Contact to whom the	n = 1, 2, 3
MAIL_SUBSCR	xx	handset should	name = mail server contact name.
		subscribe for mail
	or		xxx.xxx.xxx.xxx = IP4 address.
		notification.
	sip:name@domain		Domain where the mail resides3.
PROXYn_	name@xxx.xxx.xxx.x	Contact to whom the	See above.
MAIL_ACCESS	xx	handset should invite
		to access the mail
	or	center.
	sip:name@domain
PROXYn _	name@xxx.xxx.xxx.x	Contact from whom	4
MAIL_NOTIFY	xx	mail notification	5
		originates.
	or
	sip:name@domain
AUTH	username;password	Credentials.	username = The dial number or
[see warning note		In general credentials	string that identifies the line
below]			appearance. Generally an
		are needed for each
		6	extension or phone number.
		registered line. .	password = a secure password
			created by the system administer
			which enables a handset to
			register and/or function.
CODECS	codec1, codec2	Comma-separated list	Defaults to “g711u, g711a”. if
	e.g. g711u, g711a,	of supported codecs in	either is omitted it will be added to
		order of preference.	the end of the list.
	g729

3For mail notifications, in general you will need to define only one contact parameter for each proxy. If the proxy server automatically creates and renews subscriptions when the handset registers, then only the

PROXYn _MAIL_NOTIFY contact need be specified. If the handset must subscribe to a particular contact to get mail notification, then only the PROXYn_MAIL_SUBSCR contact needs to be specified.

4Values as above.

5For Inter-Tel SIP servers, both PROXYn_MAIL_SUBSCR and PROXYn_MAIL_NOTIFY parameters must be set in the configuration file.

6WARNING: providing credentials by using the AUTH parameters in the configuration files is a security risk and should be avoided by entering usernames and passwords in admin menu or by allowing the user to login at startup time. Credentials entered here are in plain text and accessible by anyone who can access the TFTP server files. Credentials stored in the SIP server or in the handsets are protected.

52 PN: 1725-36038-001_B.doc