Polycom 8020, 8030, 1725-36038-001 manual Rotation Secret

SpectraLink Wireless Telephone Configuration

Authentication

Select either Open System or Shared Key.

WEP Enable/Disable

Select either Enable WEP or Disable WEP.

Key Information

Default Key Enter the key number specified for use by the handsets. This will be 1 through 4.

Key Length Select either 40-bitor 128-bitdepending on the key length specified for use at this location.

Key 1-4Scroll to the key option that corresponds to the Default Key that was entered above. Enter the encryption key as a sequence of hexadecimal characters. (Use the 2 and 3 keys to access hexadecimal digits A through F.

Rotation Secret

This is used for proprietary WEP key rotation. Refer to your custom document if this feature is supported in your system.

WPA2-PSKThe security features of WPA2 (Wi-Fi Protected Access) using PSK are available and may be used if supported by the APs in the facility. Select either Passphrase and enter a passphrase between eight and 63 characters in length or Pre-Shared Key and enter the 256- bit key code.

WPA-PSKThe security features of WPA (Wi-Fi Protected Access) using PSK (pre-shared key) are available and may be used if supported by the APs in the facility. Select either Passphrase and enter a passphrase between eight and 63 characters in length or Pre-Shared Key and enter the 256-bit key code.

Cisco FSR (Fast Secure Roaming) In order to provide the highest level of security without compromising voice quality on Cisco Aironet wireless LAN APs, Polycom and Cisco Systems have cooperated to implement the Fast Secure Roaming mechanism. FSR is designed to minimize call interruptions for SpectraLink 8020/8030 Wireless Telephone users as they roam throughout a facility. Existing Aironet 350, 1100, and 1200 APs may require a firmware upgrade to support FSR. Cisco FSR requires advanced configuration of the Cisco APs in your site. See your Cisco representative for detailed documentation on configuring the APs and other required security services on the wired network. To configure Cisco FSR on a handset, you must enter a Radius Server username and password into each handset.

PN: 1725-36038-001_B.doc 33