Pressure Systems, Inc.

98RK-1 & 9816 User’s Manual©

 

 

Chapter 2

Installation and Set Up

2.1Unpacking and Inspection

Before assembling the system, use the shipping bill as a reference to ensure that all parts have arrived. Pressure Systems takes no responsibility for equipment that is damaged during shipment. If containers are broken, ripped, or damaged, contact the transportation carrier. If the equipment itself appears to be damaged, contact the Repair Department at Pressure Systems at 1-800-678-SCAN (7226).

Each shipment will contain one or more of the following components:

98RK-1 Scanner Interface Rack chassis

9816 Intelligent Pressure Scanner modules (installed in the 98RK-1, if ordered)

Start-up software (NUSS) on CD-ROM

9882 Pneumatic Blanking Unit (if purchased)

98RK-1 Scanner Interface Rack User’s Manual on CD-ROM.

2.2Safety Considerations

It is always a good idea to wear safety glasses when operating this equipment or when working with pressurized lines. Always ensure that high pressure lines are properly secured and that all pneumatic lines are rated for the proper pressure and temperature environments.

Ensure that the rack Power Switch is turned OFF before plugging the Scanner Interface Rack into a power receptacle. Always check line voltages and ensure the correct voltage for your Scanner Interface Rack prior to plugging into the receptacle.

Page 6

www.PressureSystems.com

Page 8
Image 8
Pressure Systems 98RK-1 user manual Chapter Installation and Set Up Unpacking and Inspection, Safety Considerations