Q-Logic 59021-05 manual Image Command, Authority Admin Syntax image cleanup, Keywords cleanup

￿	B – Command Line Interface
	Image Command

Image Command

Manages and installs switch firmware.

Authority Admin

Syntax image cleanup

fetch [account_name] [ip_address] [file_source] [file_destination] list

unpack [file]

Keywords cleanup

Removes all firmware image files from the switch. All firmware image files are removed automatically each time the switch is reset.

fetch [account_name] [ip_address] [file_source] [file_destination] Retrieves image file given by [file_source] and stores it on the switch with the file name given by [file_destination]. The image file is retrieved from the device with the IP address given by [ip_address] and an account name given by [account_name]. If an account name needs a password to access the device, the system will prompt you for it.

list

Displays the list of image files that reside on the switch.

unpack [file]

Installs the firmware file given by [file]. After unpacking the file, a message appears confirming successful unpacking. The switch must be reset for the new firmware to take effect.

Notes To provide consistent performance throughout the fabric, ensure that all switches are running the same version of firmware.

59021-05 A B-13