Q-Logic 59021-05 manual Examples, SANbox2 # zoneset active, The active ZoneSet is Beta, alpha beta

B – Command Line Interface			￿
Zoneset Command
	delete [zone_set]
	Deletes the zone set given by [zone_set]. If the specified zone set is active, the
	command is suspended until the zone set is deactivated. This keyword requires a
	Zoning Edit session.
	list
	Displays a list of all zone sets. This keyword is available with User authority and
	does not require a Zoning Edit session.
	remove [zone_set] [zone_list]
	Removes a list of zones given by [zone_list] from the zone set given by
	[zone_set]. Zone names are delimited by spaces in [zone_list]. If [zone_set] is the
	active zone set, the zone will not be removed until the zone set has been
	deactivated. This keyword requires a Zoning Edit session.
	rename [zone_set_old] [zone_set_new]
	Renames the zone set given by [zone_set_old] to the name given by
	[zone_set_new]. You can rename the active zone set. This keyword requires a
	Zoning Edit session.
	zones [zone_set]
	Displays all zones that are members of the zone set given by [zone_set]. This
	keyword is available with User authority and does not need a Zoning Edit session.
Notes	■	A zone set must be active for its definitions to be applied to the fabric.
	■	Only one zone set can be active at one time.
	■	A zone can be a member of more than one zone set.
Examples	The following is an example of the Zoneset Active command:
	SANbox2 #> zoneset active

The active ZoneSet is: Beta

The following is an example of the Zoneset List command:

SANbox2 #> zoneset list

Current List of ZoneSets

------------------------

alpha beta

B-78 59021-05 A