Q-Logic 59021-05 manual Passwd Command, Authority, Syntax, Keywords, Examples

￿			B – Command Line Interface
			Passwd Command
Passwd Command
	Changes a user account’s password.
Authority	Admin to change another account’s password; User to change your own.
Syntax	passwd [account_name]
Keywords	[account_name]
	The user account name. You must open an admin session to change the
	password for an account name other than your own. If you omit [account_name],
	you will be prompted to change the password for the current account name.
Examples	The following is an example of the Passwd command:
	SANbox2 (admin) #> passwd user2
	Press ’q’ and the ENTER key to abort this command.
	account OLD password	:
	account NEW password (4-20 chars)	:

please confirm account NEW password:

password has been changed.

59021-05 A B-15