Q-Logic 59021-05 manual ftpbin ftpput configdata, telnet xxx.xxx.xxx.xxx or telnet switchname

5 – Diagnostics/Troubleshooting	￿
POST Diagnostics

c.Activate binary mode and copy the configuration file from the workstation to the switch. The configuration file must be named "configdata".

ftp>bin

ftp>put configdata

d.Close the FTP session. ftp>quit

e.Establish communications with the switch using Telnet. Enter one of the following on the command line:

telnet xxx.xxx.xxx.xxx or

telnet switchname

where xxx.xxx.xxx.xxx is the switch IP address and switchname is the switch name associated with the IP address.

f.A Telnet window opens prompting you for a login. Enter an account name and password. The default account name and password are (admin, password).

g.Open an admin session to acquire the necessary authority. cli $>admin start

h.Restore the configuration file.

cli (admin) $>config restore

i.Reset the switch and close the Telnet session. cli (admin) $>reset

5-4 59021-05 A