Q-Logic 59021-05 manual Examples The following is an example of the Set Setup SNMP command

B – Command Line Interface	￿
Set Setup Command

Notes The two components of security are user authentication and fabric security. The user must be authenticated before gaining access to a switch. If an invalid account name/password combination is entered, that user can not access the switch, and thus can not gain access to the fabric. If security is enabled (True) and a valid account name/password combination is entered, that user can access the switch but can not execute any command that exceeds their authority (privileges) level. If security is disabled (False) and a valid account name/password combination is entered, that user has access to all switches in the fabric and can execute all commands (both user and admin), regardless of their authority (privileges) level.

Examples The following is an example of the Set Setup SNMP command:

SANbox2 #> admin start
SANbox2 (admin) #> set setup snmp
A list of attributes with formatting and current			values will follow.
Enter a new value or simply press the ENTER key to accept				the current value.
If you wish to terminate this process before reaching the				end of the list
press ’q’ or ’Q’ and the ENTER key to do so.
Trap Severity Options
---------------------
unknown, emergency,	alert, critical, error, warning, notify, info, debug, mark
Contact	(string, max=32	chars)	[<sysContact undefinted]
Location	(string, max=32	chars)	[sysLocation undefinted]
Trap1Address	(dot-notated IP	Address)	[10.20.71.15		]
Trap1Port	(decimal value)		[162		]
Trap1Severity	(see allowed options above)		[warning		]
Trap1Enabled	(True / False)		[False		]
Trap2Address	(dot-notated IP	Address)	[0.0.0.0		]
Trap2Port	(decimal value)		[162		]
Trap2Severity	(see allowed options above)		[warning		]
Trap2Enabled	(True / False)		[False		]
Trap3Address	(dot-notated IP	Address)	[0.0.0.0		]
Trap3Port	(decimal value)		[162		]
Trap3Severity	(see allowed options above)		[warning		]
Trap3Enabled	(True / False)		[False		]
Trap4Address	(dot-notated IP	Address)	[0.0.0.0		]
Trap4Port	(decimal value)		[162		]
Trap4Severity	(see allowed options above)		[warning		]
Trap4Enabled	(True / False)		[False		]
Trap5Address	(dot-notated IP	Address)	[0.0.0.0		]
Trap5Port	(decimal value)		[162		]

B-40 59021-05 A