Q-Logic 59021-05 manual Logged-In LED Indications, 1. Port Logged-In LED, Logging In Error

￿	5 – Diagnostics/Troubleshooting
	POST Diagnostics

5.1.2

Logged-In LED Indications

Port diagnostics are indicated by the Logged-In LED for each port as shown in Figure 5-1.

Logged-In LED

Figure 5-1. Port Logged-In LED

The Logged-In LED has three indications:

■Logged in - Continuous illumination.

■Logging in - Flashes at roughly once per second as shown in Figure 5-2.

■Error - Flashes at roughly twice per second as shown in Figure 5-2.

1 second

Logging In

Error

Figure 5-2. Logged-In LED Indications

If a Logged-In LED shows an error indication, review the alarm log for messages regarding the affected port. You can inspect the alarm log using the Alarm data tab in SANbox Manager faceplate display or the Show Alarm command. Pertinent alarm log messages will point to one or more of the following conditions:

■E_Port isolation

■Excessive port errors

59021-05 A 5-5