Q-Logic 59021-05 manual Table B-8. Set Config Switch Parameters, Description

￿	B – Command Line Interface
	Set Config Command

switch

Initiates an editing session in which to change switch configuration settings. The system displays each parameter one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

Table B-8. Set Config Switch Parameters

Parameter	Description
AdminState	Switch administrative state: online,
	offline, or diagnostics
BroadcastEnable	Enables (True) or disables (False)
	forwarding of broadcast frames.
InbandEnabled	Enables (True) or disables (False) the
	ability to manage the switch over an
	ISL.
DefaultDomainID	Default domain ID setting
DomainIDLock	Prevents (True) or allows (False)
	dynamic reassignment of the
	domain ID.
SymbolicName	Descriptive name
R_T_TOV	Receiver Transmitter Timeout Value.
	Specifies the number of milliseconds a
	port is to wait to receive a response
	from another port. The default is 100.
R_A_TOV	Resource Allocation Timeout Value.
	The number of milliseconds the switch
	waits to allow two ports to allocate
	enough resources to establish a link.
	The default is 10000.
E_D_TOV	Error Detect Timeout Value. The
	number of milliseconds a port is to wait
	for errors to clear. The default is 2000.
FS_TOV	Fabric Stability Timeout Value. The
	default is 5000 msec.
DS_TOV	Distributed Services Timeout Value
	(Management Server, Name Server).
	The default is 5000 msec.

59021-05 A B-27