Q-Logic 59021-05 manual Table B-7. Set Config Port Parameters Continued, Description

B – Command Line Interface			￿
Set Config Command
	Table B-7. Set Config Port Parameters (Continued)
		Parameter	Description
	ALFairness		Arbitration loop fairness. Enables (True)
			or disables (False) the switch’s priority
			to arbitrate on the loop.
	ARB_FF		Use ARB_FF instead of idles on loop
			FCAL option
	InteropCredit		Interoperability credit. The number of
			buffer-to-buffer credits per port. 0
			means the default (12) is unchanged.
	ExtCredit		Extended credits. The number of port
			buffer credits that this port can acquire
			from donor ports.
	FANEnable		Fabric address notification. Enables
			(True) or disables (False) the
			communication of the FL_Port address,
			port name, and node name to the
			logged-in NL_Port.
	LCFEnable		Link control frame preference, R_CTL =
			0xC
	MFSEnable		Multi-Frame Sequence bundling
	MFS_TOV		MFS limit for camp on
	MSEnable		Management Server enable on this port
	NoClose		Don't close unless another device
			arbitrates
	I/O Stream Guard		Enables or disables the suppression of
			RSCN messages
	VIEnable		Enable VI preference routing
	CheckAlps		Close before sending frames to new
			target

B-26 59021-05 A