Q-Logic 59021-05 manual Examples The following is an example of the Zoning Edit command

￿	B – Command Line Interface
	Zoning Command

list

Lists all fabric zoning definitions. This keyword is available with User authority.

restore

Reverts the changes to the zoning database that have been made during the current Zoning Edit session since the last Zoning Save command was entered.

save

Saves changes made during the current Zoning Edit session. The system will inform you that the zone set must be activated to implement any changes. This does not apply if you entered the Zoning Clear command during the Zoning Edit session.

Examples The following is an example of the Zoning Edit command:

SANbox2 #> admin start

SANbox2 (admin) #> zoning edit

SANbox2 (admin-zoning) #>

.

.

SANbox2 (admin-zoning) #> zoning cancel

Zoning	edit mode will be canceled. Please confirm (y/n): [n] y
SANbox2	(admin) #> admin end

The following is an example of the Zoning List command:

SANbox2 #> zoning list

Active ZoneSet Information

ZoneSet Zone ZoneMember

--------------------------------

wwn

wwn_b0241f

50:06:04:82:bf:d2:18:c2

50:06:04:82:bf:d2:18:d2

21:00:00:e0:8b:02:41:2f

wwn_23bd31

50:06:04:82:bf:d2:18:c2

50:06:04:82:bf:d2:18:d2

10:00:00:00:c9:23:bd:31

wwn_221416

59021-05 A B-81