Integrator’s Reference Manual
6-68 80-99208-1 Rev. D
Markov Statistics ($QCMSTATS)Syntax
$QCMSTATS
Description
Returns the statistics from the last Markov call, or the
current statistics from a Markov call in progress .
Values
None.
Default Value
None.
Power-On Default
None.
Results Returned
Result Code Condition
<Markov Stats>
OK
The statistics of the previous Markov call (or
current call if one is in progress).
Note: The statistics may not be saved over a
power-down or reboot of the modem.
The format of the <Markov Stats> return
strings is as follows (all returned statistics are
in Hex):
<Markov Stats>
MARKOV RATE:
BIT FRAMES:
BAD FRAMES:
TOTAL FRAMES:
TOTAL FRAMES:
EXPECTED/RECEIVED RAT E:
(expected rates frames are on the vertical axis;
received rate frames are on the horizontal axis,
going from zero to full in each case)
GOOD FRAMES:
(frame rate order: zero quarter half full)
ERASURES:
(frame rate order: zero quarter half full)
If no current <Markov S tats> are available
(either from a previous or current call) for
whatever reason, the <Markov Stats> table is
filled with zeros.
ERROR An unsupported syntax was entered.