AT Command Reference
80-99208-1 Rev. D 6-47
Missing Parameter Default Value(s)
See “Description” above for values assumed when optional
parameters are missing.
Power-On/Reset Default Value(s)
Results Returned
Modulation Selection Command (+MS)
Syntax
+MS[=[<carrier>[,<a utomode>[,<min_rate >[,<max_rate>
[,<min_rx_rate>[,<m ax_rx_rate>]]]]]]|? |=?]
Description
This extended-form at compound param eter is used to co ntrol
the manner of operation of the of the modulation capabilities
in the IWF (if provided in the IWF). It accepts a single,
user-definable, string parameter that contain the parameters
listed above. This string is sent to the Gateway IWF durin g
configuration by the modem, but is oth erwise not used locally.
<orig_rqst> = 3
<orig_fbk> = 0
<ans_fbk> = 2
Result Code Condition
OK Parameters are recognized and have
been processed correctly.
ERROR A parameter value was out of range
or a syntax error was encountered.
+ES: <orig_rqst>,
<orig_fbk>,
<ans_fbk>
? is used to query current settings.
+ES:
(0-4),(0-4),(0-6)
OK
=? is used to query acceptable range
of parameters.