Integrator’s Reference Manual
6-48 80-99208-1 Rev. D
Valid Va lue( s)
Missing Parameter Default Value(s)
Power-On/Reset Default Value(s)
Results Returned
Dormant Mode Commands
Dormant mode allows the modem to disconnect the active
data call, to save on over-the-air u sage and charges, while
allowing the Gateway to maintain the state of the current
data call (e.g., a ssigned IP address). Th is allows for faster
reconnects when more data packets need to be sent or
received.
The dormant mode AT commands are +CTA and $QCPKND. Also
see DCE Received Line Signal Detector Behavior (&C) on page
6-16.
Note
Dormant mode is not available for asynchronous calls.
<string> <user defined download string>
"" empty string
"" empty string
Result Code Condition
OK Parameters are recognized and have
been processed correctly.
ERROR A parameter value was out of range
or a syntax error was encountered.
+MS: <string> ? is used to q uery current sett ings.