Integrator’s Reference Manual
6-26 80-99208-1 Rev. D
Valid Va lue( s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
Results Returned
See Table 6-4 on page 6-24 for result code details.
Response Formatting Character (S4)Syntax
S4{=<value>|?}
Description
Represents the value of the character transmitted as part of
the response to commands. It is used in formatting the
response and follows the S3 character in responses wh en V1 is
in effect.
If this value is changed in the command line , the response to
that command line will use the new value.
Valid Va lue( s)
Missing Parameter Default Value(s)
N/A
Power-On/Reset Default Value(s)
Results Returned
See Table 6-4 on page 6-24 for result code details.
0-127 Range of ASCII characters that can be set as the
command termination character
13 Carriage Return character
0-127 Range of ASCII characters that can be set as the
command result code termination character
10 New Line character