Developing Modem Applications
80-99208-1 Rev. D 5-37
Enter Online-Command
Mode while a data call is
progress on the Data port,
then re-enter Online mode
+++ (surrounded by
guard time)
ATO
Change from Online to
Online-Command Mode (+++)
on page 6-40; Return to
Online Data Mode (O) on page
6-23
Enable Globalstar service
alerts AT$QCSA Service Alert ($QCSA) on
page 6-61
Get current position of the
modem AT$QCPLS Position Location Service
($QCPLS) on page 6-66
Allow the modem to mix
packet and asynchronous
data calls, by handling
packets based on the previous
dialed data call type
AT$QCPKND=2 Packet No Dial ($QCPKND)
on page 6-50
Table 5-5. Sample Typical Modem Initialization Strings
(continued)
To do this... Send these
commands or strings Where to find more
information