Integrator’s Reference Manual
3-6 80-99208-1 Rev. D
Globalstar Home
Service Provider
Mobile Country
Code (MCC)
Factory default:
Unprogrammed
The 3-digit mobile country code
(MCC) repres enting the Ho me
Service Prov ider. Typicall y, the
Globalstar Home Service Provider
MCC is the same as the MCC
component of the Globalstar IMSI
(but could be different based on
the SP’s requirements).
Re-program his para meter from
the factory default setting to a
valid Globalstar Home Service
Provider MCC.
Where in UTPST:
Globalstar NAM dia log
Globalstar Home
Service Provider
Mobile Network
Code (MNC)
Factory default:
Unprogrammed
The 1- to 3-digit mobile network
code (MCC) representing the
Home Service Provider. Typically,
the Globalstar Home Service
Provider MCN is the same as the
MCN component of the Globalstar
IMSI (but could be different based
on the SP’s requirements).
Re-program his para meter from
the factory default setting to a
valid Globalstar Home Service
Provider MNC.
Where in UTPST:
Globalstar NAM dia log
Preferred Service
Provider (Home
Service Provider)
Factory default:
Unprogrammed
The Preferred Service Provider
MCC and MNC is the same as the
Globalstar MCC and MNC defined
earlier.
Specify a Home Service Provider
MCC and MNC.
Where in UTPST:
Service Providers dialog
Table 3-1. Service Programming Parameters You Must Set
(continued)
Parameter /
Default Description Action Required
for the Modem to Operate