Qualcomm GSP-1620 Integrator’s Reference Manual Nomenclature for Table, Port Command Applies To

Integrator’s Reference Manual

Nomenclature for Table 5-4

Table 5-4 defines the port(s) affected by AT commands that may modify parameters other than those of the active AT command port. The affected port(s) are listed for each of the following three port configurations:

•Data port active only

•Control port active only

•Both Data and Control ports active

To define the affected port(s) for each AT command listed and for each of the three port configurations, Table 5-4 uses the following nomenclature:

•DATA — Applies to Data port

•CTL — Applies to Control port

•BOTH — Applies to both Data and Control ports

•NA — Not applicable to a port with this active port configuration or not applicable to a port in general

Table 5-4. Port(s) Affected by AT Commands

		Port Command Applies To:
AT Command	AT Command	Data Port	Control Port	Data & Control
	Description	Active Only	Active Only	Ports Both
				Active
Z	Reset to Default	DATA	BOTH	BOTH
	Configuration
&C	DCE RLSD (DCD)	DATA	DATA	DATA
	Behavior
&D	DTE DTR	DATA	DATA	DATA
	Behavior
&F	Set to Factory	DATA	BOTH	BOTH
	Defined Default
	Configuration
S777	Silent Retry	DATA	CTL	CTL
	Timeout
+ICF	Character	DATA	NA	DATA
	Framing Settings

5-14 80-99208-1 Rev. D