Beyond the Basics
2.Enter the channel number where you want to store a frequency and press HOLD/RESUME to select the channel.
3.Enter the frequency you want to store by using the keypad and ./CLR.
4.Press E to store the frequency into the channel.
5.To store the next channel in sequence, press e and repeat Steps 3 and 4.
To clear a mistake while entering the frequency,
Notes
repeatedly press ./CLR until the display is cleared.
If you enter an invalid frequency, an error tone sounds and Error appears. To clear the error message immediately, press ./CLR.
Your scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.
When you enter a frequency into a channel, your scanner automatically turns on the delay function and DLY appears on the display. When delay is turned on, the scanner automatically pauses scanning 2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn delay off or on, press DELAY.
If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ./CLR, then enter the correct frequency. To enter the frequency anyway, press E to accept.
21
