Highway patrol alerts, Selecting the state | Radio Shack 20-426

Beyond the Basics

highway patrol alerts

Most highway patrol vehicles today come equipped with a secondary radio system known as a MOBILE EXTENDER or VEHICULAR REPEATER. Whenever the dispatcher transmits to any vehicle in the district, the mobile extender in every car within the district is activated. Using a constant PRIORITY CHECK of speciﬁc frequencies in each state, your scanner recognizes and alerts you to transmissions from “mobile extender” radios, as well as from car-to-car, aircraft to-car and other special-purpose frequencies. You receive an audible tone and visual alert (ﬂashing light) whenever you are within approximately three miles of highway patrol or state police units using a mobile extender unit.

highway patrol/local police scanning

Highway patrol and local police frequencies are preprogrammed on a state-by-state basis. When highway patrol scanning, the highway warning alert is activated.

selecting the state

1.Conﬁrm if HIWGHWAY, PRIVATE, or POLICE appears on the display. If not, press PVT.

2.Press STATE to select the state you are operating in. See “State Code Order” table on the next page.

3.To step forward through the states (A - W), press STATE and then repeatedly press e within 3 seconds. To step backward through the states (W - A), press STATE then repeatedly press d within three seconds.

4.To scroll rapidly, hold down e or d. The scanner automatically scans the highway frequencies and HIGHWAY appears. The highway patrol priority function is turned on by default. The scanner beeps and the

32

Image 32

Radio Shack 20-426 manual Highway patrol alerts, Highway patrol/local police scanning, Selecting the state

Contents

Pro-2051 1,000-Channel Triple Trunking Mobile/Base Scanner Contents Power your scanner Set up your scannerBasics Basics Advanced scanner features Beyond the BasicsScanning a private bank Highway patrol alerts Contents Skywarn Signal StalkerWired programming Warranty Your scanner’s keypad HOLD/RESUME To Do This Your scanner’s rear view Your scanner’s display Trunk FCC wants you to know Install your scanner Mounting the scanner in your vehicle Through your vehicle’s ignition negative ground only Power your scannerFrom a wall outlet From your vehicle’s cigarrette lighter Rear View Connect your scanner Connecting the supplied antennaConnecting an external antenna Connecting an external speaker Use extreme caution when installing or removing an Listening Safely Set the squelch Set up your scannerTurn on your scanner Scanning overview Basics Listen to preprogrammed frequenciesCommon scanner terms Basics Advanced scanner features Beyond the BasicsChannel storage banks Storing known frequencies into channels Beyond the Basics Locking out a channel in hold mode Locking out a channel in scanning modeBeyond the Basics Deleting a stored frequency Locking out channels Restoring all locked-out channels Restoring a locked-out channel in hold modeMemory lock Direct channel access Beyond the Basics Hold/resume Scanning a private bank Beyond the Basics Priority scan Changing the priority channel Service scanning Setting a search band Beyond the Basics Band search Data skip Search hold Beyond the Basics Frequency skip Storing search frequencies Delay Selecting the state Highway patrol alertsHighway patrol/local police scanning State Code Order Press these buttons Action Highway warning alert Setting the alert tone volumeBeyond the Basics Scan hold Adjusting alert Highway patrol priority channelsMuting the alert tone Skip frequencies Trunked highway frequencies Skywarn About Skywarn NWR Same Programming a Fips code Programming Fips Beyond the Basics Signal Stalker Setting the signal stalker options Beyond the Basics Using signal stalker Setting the squelch Trunk tracking Programming trunking frequencies Selecting Trunking System Type Programming id scan lists manually Motorola talk groups Edacs talk groups LTR talk groups Receiving trunked systems ID scan mode ID scan hold mode ID search hold mode Direct entry id hold modeID search mode Deleting a stored ID ID monitor modeProgramming scan lists during search Restoring locked-out IDs ID lockoutReviewing ID lockout Trunking frequency conﬁrmation Setting the delay mode for trunking modeSetting priority in trunking mode Moving between scan list memories Multi-track About multi-track Edacs tracking Programming Edacs system frequencies AFS partial entry Special Edacs featuresBeyond the Basics An Edacs trunked system Edacs ID range search Edacs ID blockout Tracking LTR systems Edacs Scat Beyond the Basics Tracking Motorola systems ﬂeet map programming Preset Fleet Maps E1P1 E1P5 E1P11 Selecting a Preset Fleet Map User-deﬁned ﬂeet maps Fleet Map Size Codes Programming a Hybrid system Size code restrictionsProgramming a user ﬂeet map You can only enter within a range of 5-100 kHz, and 5 or Toggling the status bit Control channel only mode Disconnect tone detect option end code If the scanner receives no data from the PC for more than Cloning your scanner Replacing the fuse in the DC power cord Birdies Beyond the Basics Resetting your scanner Properly Frequently asked questions FAQs Drive by patrol cars but do not hear alarms? Error appears on the display. What does it mean? Speciﬁcations If Frequencies Glossary Service and repair Care