Beyond the Basics
check and the interruptions in the conversations by pressing HOLD/RESUME to hold on the desired frequency.
Notes The highway warning alert is inoperative while the scanner is on hold.
Be sure to press HOLD/RESUME to return to normal priority scan operation.
You cannot change priority channels, but you can lock out them out using L/O. You can select priority scanning mode by pressing PRI. PRI appears.
In normal Priority Scan mode, the scanner checks the priority frequency every two seconds. Priority only mode is recommended if you scan Arizona, Delaware, Florida, Michigan, Oklahoma, and Wisconsin. Hold down PRI to select priority only mode. PRI flashes.
In Priority off mode, the scanner does not check the priority frequency. PRI will not appear.
trunked highway frequencies
Trunked highway frequencies are preprogrammed for each state. When the scanner finds the control channel data, the scanner begins to find any active IDs. If the scanner finds an ID, it appears on the display and you hear it. If you press e while monitoring an ID, the scanner will check to see if any other IDs are active. If none are active, scanning resumes. When the scanner finds a control channel, it will stay on that control channel until reception of the control channel is lost. To force the scanner off the trunking control channel, press DATA. If you press d while a talk group ID is active, the frequency where the talk group is active flashes on the display. If you hold down d for two seconds, the ID and the frequency alternately appears on the display. To return to the normal display, press d again.
37
