Radio Shack 20-426 manual ID scan mode, ID scan hold mode

Beyond the Basics

Press TRUNK to start receiving trunked system information. You can receive the trunked system using the ID Scan Mode. You can receive those talk groups that you store in a scan list using ID Search Mode.

You can hear all system talk group activity (except unit- to-unit calls). This mode lets you find unknown talk groups. Your scanner defaults to receive the talk groups in ID search mode. Press SRCH in the ID search mode and the scanner will move to the ID scan mode. If you press SRCH again, it will return to the ID search mode.

ID scan mode

When your scanner finds the control channel data, it begins trunking and id SCAN scrolls on the display until the scanner finds an ID. If you have not programmed any IDs, the scanner cannot stop on an active conversation.

To remove a scan list from active scanning, press 1-9, 0 (the number of the scan list). The scan list indicator turns off, and the IDs in that list are not scanned.

To restore a scan list to active scanning, press its number again.

Note	One scan list must always be active. If you try and
	deactivate all the scan lists, scan list 1 will automatically
	be active.

ID scan hold mode

You can press HOLD/RESUME to hold an ID. HOLD and the ID will appear. To resume scanning, press HOLD/RESUME. To move the specific location, press e or d or, using 1 through 9, 0 and pressing HOLD/RESUME, you can directly access the specific location you want to which you want to move. The first number represents the scan list number and the second number represents the memory location number. To access the location number 10, use 0.

52