Radio Shack PRO-96 Resetting the Scanner, Initializing the Scanner, Digital Trunking appears.Ô, RESETTING, INITIALIZING THE, SCANNER

Problem	Possible Caus	Remedy
The scanner	The digital channel	The scanner can only
does not	or talkgroup is not	receive APCO-25 C4FM
receive digital	using APCO-25	IMBE digital signals.
transmissions	digital modulation
on digital
	The digital channel	The scanner will not
frequencies or
	or talkgroup is	receive encrypted
trunking
	encrypted	traffic.
systems
	The digital channel	Reposition the scanner
	or talkgroup is	or use an outdoor
	being transmitted	antenna to improve
	from a distant	reception.
	location

! IMPORTANT !

If you have problems with the scanner, first try to reset it to retain all memory. If that does not work, you can initialize the scanner.

You may be able to save the information in your scanner’s memory into your computer, a V- Scanner folder or another scanner before trying to initialize it. See “Cloning the Programmed Data” on Page 82 and “Working with V-Scanners” on Page 75.

Initialilzing the Scanner clears all information you stored in the scanner’s working memory. Initialize the scanner only when you are sure the scanner is not working properly. V- Scanner memory is not affected when the scanner is initialized.

RESETTING /

INITIALIZING THE

SCANNER

If the scanner’s display locks up or does not work properly after you connect a power source, you might need to reset or initialize it.!

Resetting the Scanner

1.Turn off the scanner, then turn it on again.

2.Insert a pointed object, such as a straightened paper clip, into the reset opening on the side of the scanner. Then gently press and release the

reset button inside the opening.Ô

Initializing the Scanner

.

1.Turn off the scanner, then turn it on again. !The scanner

briefly displays the DSP boot version, and then Welcome To

Digital Trunking appears.Ô

2.Press 0. The scanner displays:

108