COPYING A FREQUENCY

INTO A VACANT
CHANNEL IN A SPECIFIED
BANK

You can copy a frequency into a vacant channel in a specified bank when the scanner stops on the frequency during search or tune mode.Ô

1.Press FUNC, and then ENTER when you find a frequency you want to copy. Bank9 Store? appears in the scanner’s display.

2.If you want to copy the frequency into bank 9, press ENTER. It is stored in the first available vacant channel in the bank. Or, press your desired bank number to store, then press ENTER to store the frequency in the selected bank. Chan Store! appears for 2 seconds. All the conditions such as receiving mode and delay condition are copied on the channel. After about 2 seconds, the scanner automatically returns to search mode.

COPING A FREQUENCY
INTO THE PRIORITY

CHANNEL

You can copy a frequency into the priority channel (see “Programming the Priority Channel” on Page 40) when the scanner stops on the frequency during Search, Scan, Manual, Tune, or WX mode.

Ô NOTE Ô

If you try to copy a frequency that is already stored in the same baqnk, the scanner sounds the notice tone 3 times after you press

ENTER. Dupl.f Chxxx

appears at the bottom line. If you want to copy the duplicate frequency anyway, press ENTER, or if not, press CLR to cancel.

63