To toggle the delay setting for a channel, press./DELAY.Ô
LOCKING OUT
CHANNELS OR
FREQUENCIES

You can lock out channels to force the scanner to skip and ignore any traffic while scanning. You can also lock out up to 50 frequencies while searching to skip undesired transmissions.

Locking Out Channels

To lock out a channel while scanning, press L/OUT when the scanner stops on the channel.

To lock out a channel manually, select the channel then press L/OUT so L appears in the scanner’s display.Ô

To remove the lockout from a channel, manually select the channel and press L/OUT so L disappears.

Reviewing the Lock-Out Channels

To review all locked out channels, press MAN, and then repeatedly press FUNC and then L/OUT. The scanner will advance to the next locked out channel each time you press FUNC, and then L/OUT.

Locking Out Search Frequencies

To lock out a frequency during a search, press L/OUT when the scanner stops on that frequency. The scanner will lock out the frequency and continues searching.Ô

Ô NOTES Ô

Using the Delay Function

•Delay is automatically set as the default for each channel when you turn on the scanner.

•The delay function operates differently when monitoring trunked radio systems. For more information, see “Trunked Delay Function” on Page 90.

Locking Out
Channels

•You can still manually select and monitor locked-out channels.

•Locking out a channel with an active trunking control channel will disable monitoring of that trunking system.

Locking Out Search Frequencies

•You can lock out as many as 50 frequencies in each search bank. If you try to lock out more,

Memory full! will appear in the display, and you will be unable to lock out any more frequencies until some have been cleared. See ““Clearing a Locked- Out Search Frequency” on Page 68”.

•If you lock out all frequencies in one search bank and only this search bank is activated, All ranges Locked out! appears in the display and the scanner will not search.

67