P708•••D•+CT Welcome Ln-4

_

can be saved to one of the ten V- Scanner folders, or the scratchpad folder. When you save working memory to a V-Scanner folder, all settings contained in working memory are saved, including channels, talkgroups, lockout status, contrast settings, etc. Previously saved V-Scanner folders can be recalled and loaded into working memory. You can also erase the contents of V- Scanner folders, or move the contents of one folder to another using working memory. V-Scanner folder names are stored in Line 4 from the Welcome screen that appears when you first power on the scanner. You can change the contents of line 4 from the current working memory configuration. This information is saved when you store the V-Scanner.

Follow these steps to edit the V- Scanner name stored in Line 4 of the Welcome screen:

1.Press PGM

2.Press FUNC, TEXT. The scanner will display the Line 4 edit screen with a flashing cursor:

3.Use standard text entry procedures to enter a V- Scanner name, up to 12 characters long. Press ENTER when finished. Refer to the “Text Input Chart” on Page 48 for more information on text entry.

You can only change the name of a V-Scanner while it is loaded into

76