Ô NOTES Ô

•The priority feature does not operate while the scanner receives a trunking voice channel or during trunking delay time. Traffic on the priority channel may be missed if it occurs while the scanner is monitoring a trunking voice call.

•If you program a weather channel as the priority channel, then activate priority mode, the scanner stops on the weather channel only when the scanner detects the 1050 Hz weather alert tone.

ENTER (see “Text Input Chart” on Page 48).7.To store the next ID memory in sequence, press S and repeat Step 5.8.Press SCAN to start scanning.

When automatically storing trunked IDs in the ID list by pressing TRUNK during a trunked transmission, the scanner will automatically store the active ID in the next available open ID storage location in the ID list. We suggest leaving ID sub-bank 0 empty when first setting up an ID list. This provides a location for new auto- store IDs to be placed and organized.

Programming the Priority Channel

In addition to the 500 programmable memory channels, the scanner has one priority channel.

With the priority feature, you can scan through programmed channels and still not miss an important or interesting transmission on the priority channel. When priority is turned on, the scanner checks the priority channel every 2 seconds, and stays on the channel if there is activity until the activity stops.Ô

Programming a stored channel frequency in the priority channel

1. Press MAN.

40