Radio Shack PRO-96 Clearing, Please Wait, Operation, Complete, Press ENTER, Failure

Clearing

V-Scanner: 1

Please Wait

V-Scanner

Operation

Complete

Press ENTER

V-Scanner

Operation

Failure

Press ENTER

While the folder is being cleared, the scanner will display

This display appears after each V- Scanner operation. Pressing ENTER will return to the main V- Scanner menu. Press CLR to exit the V-Scanner main menu.

This display appears if a failure is encountered while performing a V- Scanner operation. Press ENTER to try again.

If you wish to create a new configuration based on your current one, save the current working memory to a V-Scanner folder, then edit the working memory with your changes. When you are finished with your edits, save your updated working memory to a new V-Scanner folder, leaving the V-Scanner folder with your original configuration intact. You may then use either your original configuration or the modified one.

Be sure to assign a name to each V-Scanner before you save it to a V-Scanner folder. You assign a V- Scanner name while using the configuration in working memory by pressing PGM, and then FUNC, TEXT. The text you enter here is stored in line 4 of the welcome message and saved with the contents of the V-Scanner when you write it to a folder.

You can use the V-Scanner feature to back up your work. Save your configuration to a V-Scanner folder after you make changes to a

80