Radio Shack PRO-96 Connecting the Supplied Antenna, USING VEHICLE BATTERY POWER, ANTENNA, Plug the adapter’s barrel plug into the scanner’s

CAUTIONS

•You must use a Class 2 power source that supplies 9V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the scanner’s PWR DC 9V jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

•You must use a Class 2 power source that supplies 9V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the scanner’s PWR DC 9V jack. Using an adapter that does not meet these specifications could damage the scanner or the adapter.

1.Connect the Adaptaplug™ to the adapter’s cord with the tip set to positive.2.Plug the adapter’s barrel plug into the scanner’s PWR DC 9V jack.3.Plug the adapter’s two-prong plug into an AC outlet.

USING VEHICLE BATTERY POWER

You can power the scanner from a vehicle’s 12V power source (such as cigarette-lighter socket) using a 9V, 300 mA DC adapter and a size C Adaptaplug™ adapter (neither supplied). Both are available at your local RadioShack store.

1.Connect the Adaptaplug™ to the adapter’s cord with the tip set to positive.

2.Plug the adapter’s barrel plug into the scanner’s PWR DC 9V jack.

3.Plug the adapter’s cigarette- lighter plug into your 12V power source.

If the scanner does not operate properly when you connect a DC adapter, unplug the DC adapter from the power source and clean the socket, or check the adapter’s internal fuse.

ANTENNA

Connecting the Supplied Antenna

To attach the supplied flexible antenna to the antenna jack on the

28