Radio Shack PRO-96 ID was saved, 2.Press PGM, 3.Press TRUNK, 1.Navigate to a channel in the, If you want to tag the ID, press, use the decimal point for a hyphen.Ô

To automatically store a talkgroup ID, press TRUNK when the scanner stops on a voice channel transmission or when a talkgroup ID is indicated in the manual mode. The ID of the active talkgroup will be automatically stored in the next available ID memory location. The bottom line of the scanner display indicates where the ID was stored as ID save X-YY and then changes to ID#ZZZZZ, where X is the sub- bank number, YY is the ID number within the sub-bank, and ZZZZZ is the stored talkgroup ID code.

If the ID has already been stored when you press TRUNK, ID was saved appears in the scanner’s display.

Follow these steps to manually store talkgroup IDs or to edit a stored ID.Ó

1.Navigate to a channel in the

desired trunking bank using MAN or the S or T keys

2.Press PGM.

3.Press TRUNK.

4.Select the ID memory you wish to edit using any of the methods described above.

5.Enter the talkgroup ID and press ENTER. If necessary,

use the decimal point for a hyphen.Ô

6.If you want to tag the ID, press TEXT, enter the desired text tag for the ID. Then press

Ó HINTS Ó

Use the following keystrokes to navigate through the ID lists:

•Press PGM, TRUNK to enter the ID list for the current channel storage bank.

•Press and release the S or T keys to scroll through the ID memories one at a time.

•Press and hold the S or T keys to scroll through the ID memories rapidly.

•Press TRUNK to advance to the next ID sub-bank.

•Press FUNC S or T to advance to the next or previous ID list.

ÔNOTES Ô

•If you made a mistake in Step 5,

Invalid ID. appears and the scanner beeps when you press ENTER. Start again at Step 3.

•You can enter either decimal or AFS code for ED (EDACS) ID. The default setting is decimal ID entry. To toggle AFS or decimal EDACS ID

display, press FUNC then 2. AFS Format will appear in the display for about 2 seconds. Now you can enter EDACS ID codes in AFS format.

•If you entered an ID code that is already

stored in another ID channel, Dupl ID appears in the scanner’s display. If you want to store the ID code anyway, press ENTER. To cancel the operation, press CLR.

39