Radio Shack PRO-96 DSP AGC On, CLONING THE, PROGRAMMED DATA

DSP AGC Off or

Ô NOTES Ô

Using the Digital AGC Function

•Digital AGC has no effect on analog transmissions.

•You may notice more background noise with Digital AGC on.

Cloning the Programmed Data

CLONE MODE Incorrect Model appears if the

scanner receives data from another scanner other than a PRO-96.

can result in a low level audio signal if a user on the system is not speaking close enough to their radio microphone.

Your PRO-96 features Digital AGC, which can compensate for these low audio levels when they occur. By default, Digital AGC is turned on. If desired, you can toggle the Digital AGC function on or off by pressing FUNC, and then MAN at any time. The display will

briefly show

DSP AGC On accordingly.Ô

CLONING THE

PROGRAMMED DATA

You can transfer the contents of the current scanner working memory to and from another PRO-96 scanner using an optional connecting cable with 1/8-inch (3.5

mm)phone plugs on both ends (use Radio Shack part number

42-2420 available at your local RadioShack store), or to a computer application designed to work with this scanner using a PC interface cable (use Radio Shack

part number 20-289, available at your local RadioShack store).Ô

Follow these steps to clone the data.

1.Turn on both scanners.

2.Connect the connecting cable

to each scanner’s PC/IF jack.

CLONE MODE UP to send, remove cable to exit appears in the

scanner’s display.

3.Press S. Confirm send data? 1=YES Press other key for NO.

82