Block

 

 

 

Size Code

 

 

 

 

 

 

 

 

 

 

 

 

6

S0

S4

S0

S0

S0

S12

S12

S12

7

S0

S4

S0

S4

S0

—

—

—

 

 

 

 

 

 

 

 

 

Press ENTER for each entry. If you make a mistake, press CLR and enter the correct size code.

Ô NOTE Ô

When you try to store more than 150 talkgroup

IDs in a bank,

Memory Full! appears in the scanner’s display. Clear some talkgroup IDs in order to store new ones (see “Clearing Talkgroup IDs” on Page 91).

Talkgroup IDs

Each channel storage bank has an associated talkgroup ID list, for a total of 10 talkgroup ID lists. Each ID list has 5 sub-banks. Each sub- bank has 30 ID locations. You can program up to 150 talkgroup IDs in each bank, so you can program up to 1500 talkgroup IDs in 10 banks. When the scanner stops on a transmission in the Motorola or EDACS mode, it checks to see if the ID has been stored in the associated ID list. In the Closed Mode, the scanner only stops on the transmission and displays its text tag if you have stored and not locked out the ID. In the Open Mode, the scanner always stops on all transmissions except those you specifically exclude, and displays the ID’s text tag if you have stored the ID. For a detailed description of Open and Closed Mode operation, see “Open and Closed Mode Operation” on Page 87.

Storing Talkgroup IDs

Each talkgroup on a trunked radio system is identified by a talkgroup ID. You can store talkgroup IDs automatically while scanning the trunked system in Open mode, or manually by entering the IDs directly in the ID list. Ô

38