Radio Shack PRO-96 USING FREQUENCY COPY, TUNE, MANUALLY TUNING A FREQUENCY, Press, Press, frequency, it stops on the frequency.Ô, TUNE, ENTER, Using Frequency Copy

MANUALLY TUNING A FREQUENCY

You can manually set the scanner to move through all receivable frequencies, or select a specific frequency as a starting point.

1.Press TUNE. TUNE and the current frequency appear in the display. The scanner automatically begins tuning up or down.

2.Use the number keys to enter the frequency where you want the scanner to start.

3.Press ENTER. After two seconds the scanner will automatically tune from the entered frequency.

4.Press S or T to change the direction of the tune. When the scanner finds an active

frequency, it stops on the frequency.Ô

USING FREQUENCY COPY

You can easily copy a frequency into a specified channel, a vacant channel in a specified bank, or a priority channel. This feature provides and easy method of storing frequencies of interest you encounter while searching or tuning. Ô

Ô NOTES Ô

Manually Tuning a Frequency

If you press PAUSE while tuning, the scanner stops tuning and

**PAUSED** appears in

the display. Press PAUSE again, and the scanner resumes tuning. While tune mode is paused, you can step up or down one frequency at a time by using the S or T keys.

Using Frequency Copy

You cannot copy a frequency from the Marine search bands.

61