Radio Shack PRO-96 Seek ON, USING SEEK SEARCH

USING SEEK SEARCH

While the scanner is searching, you can activate seek search by pressing FUNC then 7. Seek ON appears on the bottom line. The scanner stops on each active frequency for five seconds and resumes searching automatically. Seek functions only in search banks 1, 2, 3, 4, 5, and 6.

•You can copy and save a frequency into a specified bank, channel, or priority channel when the scanner finds an active frequency. See “Using Frequency Copy” on Page 61 to save the frequency. The frequency copy works only in search banks 1, 2, 3, 4, 5, and 6.

•There are several group banks in SR2 Police/Fire and SR4 ham bands. You can turn off or on the groups by pressing the group numbers. For example, to toggle group bank 0, press 0.

•In the Air and Limit search

bands, press FUNC then press S to start searching up from

the lowest frequency or press T to start searching down from the highest frequency.

•You can press S or T at any time to change the search direction, or force a search resume while stopped on an active frequency.

•Use S or T while paused to increment the frequency one step at a time.

60