Radio Shack PRO-96 USING THE ATTENUATOR, DC – configures the channel for DCS mode, To assign attenuation to a channel in the scanner:

Ô NOTE Ô

MO and ED modes are not available when performing service searches, limit searches and the TUNE function.

DC – configures the channel for DCS mode.

MO – configures the channel for the MO mode for analog or digital Motorola trunking system channels, or APCO-25 trunking system channels.Ô

ED – configures the channel for the ED mode for EDACS trunking system channels.

USING THE ATTENUATOR

To reduce interference or noise caused by strong signals, you can reduce the scanner’s sensitivity with the attenuator.

There are two attenuator modes in your scanner. Normal attenuator mode allows you to set the attenuator on a per-channel basis. Normal mode is useful when individual channels are found to be prone to interference.

Global attenuator mode applies attenuation to every channel in the scanner, and overrides any normal mode attenuator settings that you may have entered

To assign attenuation to a channel in the scanner:

Press ATT when the scanner is stopped on a channel, or by manually navigating to a channel by using direct channel entry or pressing the S or T arrow keys. A will appear in the top line of the display. Press ATT again to toggle attenuation off.

70