Radio Shack PRO-96 is displayed, 1.Press PGM, and then TRUNK, 3.Press FUNC, and then press, available, try the following common fleet maps:Ô, Block, Block, Size Code, Size Code

is displayed.

1.Press PGM, and then TRUNK.2.Press FUNC, and then S or T to select the desired bank.3.Press FUNC, and then press

8. Block 0 size code. Use 15 for type II. S-00

4.Enter the size code supplied with the Type I system information, referring to the prompts that appear in the display. If the information for your Type I system is not

available, try the following common fleet maps:Ô

Ô NOTES Ô

•The default setting of the bank is for Motorola Type II. However, if you set Type I and wish to restore Type II, enter 15 at Step 4.

•To confirm the input, repeat Steps 1-4 and press ENTER. Each time you press ENTER, you confirm the size code. If you find an error, press CLR and begin again at Step 1.

Block				Size Code
	1	2	3	4	5	6	7	8
0	S11	S4	S4	S12	S4	S3	S10	S1
1	S11	S4	S4	—	S4	S10	S10	S1
2	S11	S4	S4	S4	S12	S4	S11	S2
3	S11	S4	S4	S4	—	S4	S4	S2
4	S11	S4	S4	S4	S4	S12	S4	S3
5	S11	S4	S4	S4	S4	—	S4	S3
6	S11	S4	S12	S4	S4	S12	S4	S4
7	S11	S4	—	S4	S4	—	S4	S4

Block				Size Code
	9	10	11	12	13	14	15	16
0	S4	S0	S4	S0	S3	S4	S4	S3
1	S4	S0	S0	S0	S3	S3	S4	S10
2	S0	S0	S0	S0	S11	S10	S4	S10
3	S0	S0	S0	S0	S4	S4	S11	S11
4	S0	S0	S0	S0	S4	S4	S11	S0
5	S0	S0	S0	S0	S0	S4	S0	S0

37