Ô NOTES Ô

•If the radio appears to be trunking to the wrong frequencies when monitoring an 800 MHz system, you should try to configure the system for splinter operation.

•Splinter systems exist only in the 800 MHz band, and only use the 3600 bps control channel type. Setting splinter configuration on VHF, UHF, 900 MHz and 800 MHz APCO- 25 systems will have no effect.

6.25, 7.5, 12.5, 15, 25.0, or 50.0kHz, and then press
ENTER.

PROGRAMMING

MOTOROLA 800 MHZ
SPLINTER SYSTEMS

Certain 800 MHz Motorola trunked radio systems operate using splinter channels that are in between the channels in the normal 800 MHz band plan. These systems are known as “splinter systems”. Your scanner features an offset mode to allow reception of these systems.Ô

1.Press PGM, and then TRUNK to enter the ID program mode.

2.If necessary, press FUNC then S or T to select the desired bank.3.If necessary, press MODE to select Motorola trunking mode.4.Press FUNC , and then 3 to edit the 3600 CC Mode.5.Press S or T to selectNormal, Splinter, Table, or Multi Table, and then press

ENTER.

Programming Fleet Maps

You must set the fleet map if you want to receive a Motorola Type I system. Fleet maps are included along with other information about Motorola Type I systems at www.trunkscanner.com

Follow these steps to program a fleet map.

36